Replacement Kit for 64-3/16 inch FUHR Hook Version Multipoint Lock 20 MM Faceplate

Replacement Kit forFuhr Multipoint lock with Hooks 499016099

The Multipoint LockTongue versionGear and extension with 2 locking points, matches up within 7/8 inch on top hook and 3/16 inch on bottom hook.The Hook latch on the Fuhr Multipoint Lock was 1/4 inch wide.The Tongue Latch on the replacement is 5/16 wideBoth styles of latches are tapered

FaceplateWidth: 3/4 inch (20mm)Backset: 1.38 inch (35mm)Deadbolt Throw: 1.00 inches. (25.4mm)Handle Height: 36.00 inch (914mm),Bottom Tongue Position: 24.41 inches (620mm)Maximum Cutoff: 6.30 inches (160mm)Top Tongue Position: 29.25 inches (743mm)Maximum Cut off 7.67 inches (195m) Faceplate Width .77 (20mm)

Replacement Lock Requires some minor modifications.

NOTE 1: The original Fuhr lock was about 64-3/16 in length with radius corners The Fuhr lock did not go from the top of the door to the bottomThe replacement will need to be cut to length with hacksaw and either round off corners or mortise door to fit square cut.

NOTE 2: If your door is taller and the lock is longer than this one Contact Office

Optional:A higher tongue position at 37.20 inches up from handle is available for doors from 79.13 inches – 92.52 inches in height.Requires a mortise for longer Extension and additional strike plate.

Replacement / Installation Guide: article

Additional Resources:Article: How to change direction of mishandling device on HOPPE lock

Attaching HOPPE Multipoint Lock Top Extension

Rehanding a Hoppe HLS9000 Multipoint Lock